Heating

The apartment is equipped with a CREATE Warm Crystal electric convection heater with digital display. 

How to use:

1. Plug into the socket — it will beep and enter standby mode.

2. Press the ON/OFF button to start heating. The heater will start in ECO mode (medium power) by default.

3. Press the MODE button to choose your preferred setting:

🌿 ECO — medium power, energy-saving

☀️ Comfort — maximum power, warms up faster

❄️ Antifreeze — minimum setting, keeps the room from getting too cold

4. Use the ◁ ▷ arrow buttons to set your desired temperature (recommended: 20–22 °C). Note: the display shows the current room temperature — press the arrows to check or change the set temperature.

5. To set a timer (auto-off), press the Timer button and select between 1–24 hours.
   
   

Important:

• Do not cover the heater — fire risk.

• Keep at least 15 cm clearance from the floor and 50 cm from the ceiling.

• Do not place objects on top or in front.

• Please leave the heater plugged in at all times — this allows us to monitor and adjust the temperature remotely for your comfort.

• To switch off, simply press the ON/OFF button — do not unplug..

⬅️ Go Back

⬆️ Back to main menu